Search
Now showing items 1-10 of 19
Design and automated testing of PCI express interface of proton computed tomography detectors.
(2019-04-16)
Throughout this thesis, I will propose a transmit-received-engine based logic design proposed by this thesis works at the PCI Express Transaction Layer in collaboration with Xilinx 7 Series FPGAs Integrated Block for PCI ...
Non-isothermal non-Newtonian flow and interlayer adhesion in Large Area Additive Manufacturing polymer composite deposition.
(2019-11-25)
Large Area Additive Manufacturing (LAAM) has seen substantial improvement in recent years due in large part to the addition of short carbon fiber reinforcement to the polymer feedstock. The addition of short carbon fibers ...
Characterization of optically pumped interband cascade lasers.
(2019-07-12)
Interband cascade laser (ICL) devices have been optically pumped and the results observed are presented here. The samples being used for this research were grown by molecular beam epitaxy at the Naval Research Laboratory. ...
High-density intraoperative brain monitoring during cardiac surgery.
(2019-04-10)
Functional near-infrared spectroscopy (fNIRS) is a prominent technique that allows assessment of functional brain activity by measuring hemodynamic responses. Most existing functional brain imaging methods are only capable ...
Turbulent flow characteristics over realistic ice roughness on simulated NACA 0012 airfoils.
(2019-11-14)
Ice accretion codes are integral to the design of aircraft that function safely during adverse weather conditions. Improvements to these codes are possible by characterizing the skin friction caused by ice roughness along ...
Characterization of fan coils units with electrically commutated motors.
(2019-08-05)
The data from five manufacturers were obtained for the purpose of developing of a method for generalizing fan coil units (FCUs) with electronically commutated motors (ECMs. In addition, the University of Louisiana at ...
Characterization of the internal temperature and phase state of amorphous materials using ultrasonic non-destructive evaluation.
(2019-08-07)
Ultrasound has a wide range of applicability and is used across many industries for non-destructive evaluation. Temperature is one of the key parameters in thermodynamic systems, and ultrasound has been studied as a means ...
Topology optimization of weakly coupled thermomechanical systems for additive manufacturing.
(2019-11-19)
Topology optimization is a design optimization method that generates structures with complex geometries that are ideally suited for additive manufacturing. Most additively manufactured structures have anisotropic material ...
Computational modeling of fiber reinforced composites melt flow in nozzle extrudate for polymer deposition additive manufacturing.
(2019-11-18)
Understanding effects of processing conditions on properties of processed composite materials for polymer deposition additive manufacturing is critical, especially in the recent-emerging Large Area Additive Manufacturing ...
Conservative intervention through changing shoe type to reduce injury risk factors in walking and running.
(2019-04-17)
Running and walking are associated with various injuries. Because the injury mechanisms for these injuries are mechanical in nature, a logical way to conservatively reduce injury risk is by wearing shoes that alter the ...